Suppose that you need to test a 1.5V, AA-size alkaline battery. You can apply a short circuit and measure current, or you can measure open-circuit voltage, but neither method properly tests the ...

Figure 1 gives the circuit for slow charging a NiCd battery pack with two AA-sized 1200-mAH cells. The battery is charged ...

Download this article in PDF format. High-brightness visible-light LEDs (VLEDs) require a constant-current source. This simple, RFI-free circuit takes advantage of the normally-on properties of the ...

Normally, when a project calls for addressable LEDs, we just throw a strip of WS2812s and an Arduino together, cobble together some code from the examples in the FastLED library, and call it a day. We ...

This code supports Application Note AN1138: A Digital Constant Current Power LED Driver, using the PIC12HV615? an 8-pin, PIC microcontroller (MCU) with many integrated analog features. The LED driver ...

An idea in an earlier blog is to make a pwm interface that can accept 5, 12 and 24V pulse streams. That one uses a bunch of resistors and has three separate inputs. Below that, wise commenter DB ...

A ripple-generating circuit is usually needed to ensure stability of constant-on-time (COT) controlled buck converters. Different values of the ripple generating circuit can have direct impacts on ...

The LM334 is not only an adjustable current source, but it is also a rectifier. Right on the front page of the TI data sheet are the words: “Reverse applied voltages of up to 20V will draw only a few ...

Controlling LEDs is really quite simple. As you know, they need to be current limited which is as easy as applying Ohm’s law to your given set of values. To make things even more even there’s a slew ...