One of the most productive new approaches to power quality is immunity testing — making sure that loads can tolerate common disturbances without additional filtering or support. This kind of testing ...

[The LED Artist] often found a need for a relatively high voltage (100 to 200 Volt) but low current DC power supply, and it turns out that a small HV generator that uses a single AA cell only took ...

I am trying to verify that a system can run at 50 or 60 Hz and 100 - 240 VAC. Can a Variac be used change both output frequency and voltage or just voltage? The typical solution to your problem would ...

This application note describes methods for testing components using an oscilloscope and waveform generator. We will show you how to test capacitors, inductors, diodes, bi-polar transistors, output ...

The PVX-4110 is a ±10 kV pulse output generator that is optimized to drive deflection plates, grids and other capacitive loads. It is protected against arcs, short circuits and load transients with ...

[The LED Artist] often found a need for a relatively high voltage (100 to 200 Volt) but low current DC power supply, and it turns out that a small HV generator that uses a single AA cell only took ...

For a long time, I have thought that pulse generator outputs should not have adjustable amplitude and offset. Instead, they should have an adjustable top value and a separately adjustable bottom value ...